The dark evenings and winter chill made me determined to finish the small rug/shower-room mat that had languished on my big twining loom since last spring was sprung.
That, plus the fact I’d agreed to run a little workshop on the subject of “simple forms of weaving” for our Guild’s Skills Day at the end of January. I got stuck in and finished the shower mat within a couple of evenings – it’s now in use – and warped the loom with torn-up sheets ready for the workshop. My “students” seemed to enjoy themselves and between us we did several inches of a new, full-size rug in warm shades of brown, orange & light green, still ongoing here at home. However, during the day, it did occur to me that it would be good to have some smaller looms available for people to learn the technique on and hopefully complete something small but useful within a day.
So I started looking around for some suitable wood, ordered a batch of beechwood pegs and raided a DIY superstore for eye-bolts, wing-nuts and stainless steel rods, as we also needed to buy a sander for our younger daughter’s latest project. (Which is possibly THE most expensive way of acquiring eye-bolts, all beautifully but individually packaged & priced to match!) We did have some old bed-slats in the garage roof, but eventually I decided that they were too wide to handle easily and too shallow to fix the pegs into securely. Then my eye fell on a batten that had once held a 6′ wide Roman blind… although it’s technically a soft wood, it proved to be very sturdy and quite hard to drill into, so I think it’ll stand the strain. So I chopped it into 18″ lengths, bolted those into a square, then drilled holes & inserted the pegs along the top & bottom. Once I’d sorted out a way to fix the rod down the side – random washers & wing nuts to the rescue – I had a slightly eccentric but entirely workable loom.
However it took me a couple of days, on & off round Real Life, to weave an 18″ square, which made me think it’s a little too large for what I was aiming at. So the next construction project will be a 12″ version. In the meantime I’ll be weaving a new top for a little old footstool, not to mention working on a set of matching chair pads for our mis-matched kitchen chairs. And then – I might just go 3d with it and maybe try a small basket to keep yarn in?
That’s one way to make a dent in my fabric stash! And there are plenty of others…
A recycled lifestyle... 